Free Shipping on
$99 or More!
Need Help? Call us
E-Mail: Contact Page
We are located in Florida USA
Fountain Rubber Stoppers for your indoor or outdoor fountain
Comes in 7 sizes
A - stopper size 1-1/8" top diameter and tapers down to 3/4" ($3.95)
B - stopper size: 1-1/4" top diameter and tapers down to 1" ($4.25)
C - stopper size: 1-3/8" top diameter and tapers down to: 1-3/16" ($4.85)
D - stopper size: 1-5/8" top diameter and tapers down to: 1-3/8" ($5.35)
E - stopper size: 1-3/4" top diameter and tapers down to: 1-1/2" ($5.85)
F - stopper size: 2" top diameter and tapers down to: 1-5/8" ($6.45)
G - stopper size: 2-1/8" top diameter and tapers down to: 1-3/4" ($6.85)
Stoppers have a 1/4" hole to accomodate your pump's electrical cord and a slit for easy connection that closes perfectly when inserted into your fountain's hole.
NOTE: If you need a stopper's hole so a smaller light cord (round 1/8")) can be used, please let us know, we can do ts.
If you need a specific size, please email us at: sales@Fountainsnslate and we will reply if we can get you your plug size.
How to measure and insert a Rubber Stopper;
1) Measure across the hole's opening; this will give you the stopper's TOP diameter
2) Insert pump's power cord along slit and into hole inside of the stopper,
3) Push the stopper down inside the fountain's hole, everything will seal up tight
4) If you measure across and you still think you need a larger plug, get the next size up. It's better to have a little protrude than too small a plug.
We can not answer to questions in our GUEST BOOK as we have no way of replying.
Please use our contact page or email address below.
Place your order by phoning: 1-800-643-5804
Email: Info@Fountainsnslate.com Or Email: Sales@Fountainsnslate.com
Fountains n Slate
3841 Arbor Ave.
Bunnell, FL. 32110 USA
Building Fountains & Tabletop Fountains for over 19 years.
© 1999-2015 Fountains n Slate